LP-E6 Dummy Battery+Type-C Power Supply Interface Straight Line (50CM) (300CM) S

Features:
1. Support mainstream power banks and fast charging heads in the market, such as 9V/12V/15V/20V, which can be used.

2. Wide voltage power supply, high conversion efficiency up to 98%, low heat generation, high power, and can be continuously captured without power outage/jamming.

3. Built in reverse, high voltage, and overload protection circuits allow for safe and reliable use of fake batteries, providing safer camera protection.

4. Full decoding chip, fully compatible with replacing the original LP-E6 battery, with the same effect as using a battery.

5. The new structural design is convenient, compact, and portable, with a power indicator light for clear working status.

Specification:
Input voltage: 9V/12V/15V/20V

Output voltage: 8.4V/3A

Product size: 56.7 * 38.0 * 20.6mm

Instructions for use:

1. Use a USB to TYPE-C cable or TYPE-C to TYPE-C cable to connect to a power supply with fast charging protocol

2. When powered on, the green POWER power indicator light is on to indicate normal operation, and if it is not on, there is no power input.

3. Install the analog battery into the battery compartment and cover it with the battery cover

4. Turn on the camera power switch for normal use

Attention: (When the input is 9V, the output may only have a normal voltage drop of 7.8V, which can be used normally. The camera may not display full battery)

Compatible:

For Canon 5D25D35D46D6D260D
7D7D270D80D90D5DSRRR5R5CR6R6IIR7...

Packing List:
As show