NP-FZ100 Dummy Battery+Type-C Power Supply Spring Wire (35-100CM) Straight Line

Features:
1. Support mainstream power banks and fast charging heads in the market, such as 9V/12V/15V/20V, which can be used.

2. Wide voltage power supply, high conversion efficiency up to 98%, low heat generation, high power, and can be continuously captured without power outage/jamming.

3. Built in reverse, high voltage, and overload protection circuits allow for safe and reliable use of fake batteries, providing safer camera protection.

4. Full decoding chip, fully compatible with replacing the original NP-FZ100 battery, with the same effect as using a battery.

5. The new structural design is convenient, compact, and portable, with a power indicator light for clear working status.

Specification:
Input voltage: 9V/12V/15V/20V

Output voltage: 8.4V/3A

Product size: 51.7 * 38.7 * 22.7mm

Instructions for use:

1. Use a USB to TYPE-C cable or TYPE-C to TYPE-C cable to connect to a power supply with fast charging protocol

2. When powered on, the green POWER power indicator light is on to indicate normal operation, and if it is not on, there is no power input.

3. Install the analog battery into the battery compartment and cover it with the battery cover

4. Turn on the camera power switch for normal use

Attention: (When the input is 9V, the output may only have a normal voltage drop of 7.8V, which can be used normally. The camera may not display full battery)

Compatible:

FOR Sony A9A6600A7IIIA7R3A7M3A7S3A7R4A7M4FX3A1A6700A7CA7CIIFX30ZV-E1A7R5......

Packing List:
As show